Model 2654-2 Lightning Pulse Generator for RTCA/DO-160E/F/G Section 22 lightning induced transient susceptibility testing

APPLICATION The Solar Model 2654-2 Lightning Generator synthesizes electrical impulses needed for testing susceptibility to transients induced in aircrax equipment by lightning strikes. The peak voltage and current requirements of RTCA/DO-160E/F/G Section 22 are met at Levels 1 through 3. Using available accessory devices, transient waveforms can be applied by pin injection, cable bundle injection and ground injection. DESCRIPTION The transient format, repetition rate, and amplitude are selected using two controls on the front panel of the Model 2654-2. The system can generate a single transient at the press of a button, or it can be programmed to generate multiple strokes as required by RTCA/DO-160E/F/G, Section 22. Waveforms can be delivered singly or in groups of 10, and for waveform 3A and 3B multiple burst sequences can be repeated at intervals of 3 seconds for 5 minutes. Multiple stroke and multiple burst tests can be performed with pseudo random or uniform transient spacing. The transient generator modules installed in the system mainframe are automatically recognized by the microcontroller, and transient format and repetition rate options are displayed on an LCD screen. Because of the modular design, the system may be ordered with only the modules a user requires. Other modules supporting additional DO-160 waveforms may be added at any time. FEATURES ? Modular design ? Single rack portability ? Programmable single stroke, multiple stroke, multiple burst waveforms ? Pin injection, cable bundle injection, ground injection up to Level 3 ? Self-contained microprocessor control ? LCD system display (See accessories tab for accessories recommended for testing.)

Power requirements: 115 V 60 Hz 4 A max.; 230V 50 Hz, 2 A max. Dimensions: 20.2" wide x 6.4" high x 19.9" deep (51.3 cm x 16.3 cm x 50.5 cm) Weight: 57 lbs. (25 kg) with all modules slots filled

DO160 SECTION 22 EQUIPMENT AND ACCESSORIES EQUIPMENT USED For DO160F SECTION 22 LEVELS 1-3 W1 W2 W3A W3B W4 W5A 1 MHz 10 MHz CB CB PIN CB CB PIN CB GI PIN GI CB 1 2654-2 Lightning Pulse Generator X X X X X X X X X X X 2 2654-2 Controller X X X X X X X X X X X 3 2654-1/FD driver module X X 4 2654-1/FDG driver module X X 5 2654-B driver module X 6 2654-C driver module X X 7 2654-D driver module X 8 2654-1/ED driver module X X X 9 2654-R blank interface module 10 2654-1/AEC external module X 11 2654-1/EEC1/2 external module X 12 2654-1/EEC3 external module X 13 2654-1/EEP external module X 14 2654-1/EEG external module X 15 2654-1/FEP external module X 16 2654-1/FEG external module X 17 2654-1/FEC external module X 18 2115-1 conditioning network X 19 2809-1 calibration loop 0.02 Ω X 20 2809-2 calibration loop X X 21 2809-3 calibration loop X X X 22 2902-1 current sensing resistor X X 23 2903-1 series resistor 25 ohms X 24 9454-1 high voltage attenuator X X X X X X X X X X X 25 21406-1N monitoring probe X X X X X X X X X X X 26 9719-1N injection probe X 27 2915-1 injection clamp level 1 X 28 2915-2 injection clamp level 2 X 29 2915-3 injection clamp level 3 X X PDFCROWD.COM30   9616-2 injection clamp X XX* XX 31   2816-1 (for use with 9616-2) X X X 32   9915-1 (for use with 9616-2) X X 33   9916-1 (for use with 9616-2) xxxx xxxx xxxx 34   2806-1M (coaxial cable with banana plug) X X X X X X X X 35   2806-1BN  (coaxial cable with banana plug and N connectors) X X X * Two units required for test